🔥 Wednesday Night Auto Comps Close At 10pm 🔥 Enter Now & Best Of Luck Legend! 🍀
🔥 Wednesday Night Auto Comps Close At 10pm 🔥 Enter Now & Best Of Luck Legend! 🍀
🔥 Wednesday Night Auto Comps Close At 10pm 🔥 Enter Now & Best Of Luck Legend! 🍀
🔥 Wednesday Night Auto Comps Close At 10pm 🔥 Enter Now & Best Of Luck Legend! 🍀
🔥 Wednesday Night Auto Comps Close At 10pm 🔥 Enter Now & Best Of Luck Legend! 🍀
🔥 Wednesday Night Auto Comps Close At 10pm 🔥 Enter Now & Best Of Luck Legend! 🍀
🔥 Wednesday Night Auto Comps Close At 10pm 🔥 Enter Now & Best Of Luck Legend! 🍀
£1.00Per Entry
(808413)
100% Compatible with original TStak cases
Metal pin side latches allows-TSTAK modules to be connected together
Heavy duty metal front latches provide increased strength, durability and longevity
Lockable – via padlock (Not Included) for added security
Half size internal tote tray for easy access to key hand tools, fixings and power tool accessories
The case is part of the All-New 2.0 range of enhanced TSTAK cases. The TStak 2.0 range now includes an IP54 rated water seal, giving the case improved water and dust protection. The front latches have been upgraded to a more robust and heavy-duty design while the stackable side latches now use have a metal pin, rather than previous plastic pins.
This will give the cases a longer life and better all-round durability. The new boxes in the TStak 2.0 range all come with a slot that allows you to easily install the ‘Dewalt Connect’ tracker. TStak 2.0 cases are 100% cross-compatible with TStak 1.0 cases so you can mix n match any of your old TStak cases with any of the newer range.
The DEWALT TSTAK 2.0 IP54 Deep Box can be used for storage of corded and cordless tools and features a removable tray for access to essential tools. The DEWALT T-STAK storage system has been designed to carry and transport T-STAK modules, giving the option of connecting and customising multiple units depending on what is required for a jobsite.
The new heavy duty metal front and metal pin side latches have been built for added durability and longer life. The IP54 waterseal provides water and dust protection to tools and fixings inside the box.
The Internal fixing point built into the TSTAK box is DEWALT Tracker ready, allowing for a DEWALT Tracker to be installed and box tracked via DEWALT Tool Connect.
1x T-STAK 2.0 Deep Box
1x Half Size Internal Tote Tray
(219107)
Speed tip gives you a fast start
3 flat sides eliminate slipping in the chuck
TSTAK compatible case
The Dewalt 19 piece black & gold drill bit set comes in a small tough case.
This means it is TSTAK compatible and also allows multiple sets to be stacked and locked together.
The drill bits are made from high speed steel which gives them better wear resistance and a longer life.
They have a “Toughcore” which is a tapered central core and it increases stability and durability
1x 1mm HSS Metal Drill Bit
1x 1.5mm HSS Metal Drill Bit
1x 2mm HSS Metal Drill Bit
1x 2.5mm HSS Metal Drill Bit
1x 3mm HSS Metal Drill Bit
1x 3.5mm HSS Metal Drill Bit
1x 4mm HSS Metal Drill Bit
1x 5mm HSS Metal Drill Bit
1x 5.5mm HSS Metal Drill Bit
1x 6mm HSS Metal Drill Bit
1x 7mm HSS Metal Drill Bit
1x 8mm HSS Metal Drill Bit
1x 10mm HSS Metal Drill Bit
Ideal for fast cuts in wood, plastic and plasterboard.
The DEWALT 3 Piece DT20760 Oscillating Blade Set is ideal for fast cuts in wood, plastic and plasterboard. Contains:1 x DT20701 Multi-Tool Wood & Nails Blade 43 x 30mm1 x DT20702 Titanium Bi-Metal Multi-tool Blade 55 x 44mm1 x DEWALT DT20705 Multi-Tool Fast Cut Wood Blade 43 x 65mm
Upgrade your toolkit with the Dewalt 3-Piece Oscillating Blade Set (DT20760), designed for high-performance cutting in wood, plastic, and plasterboard. This versatile set includes: 1 x DT20701 Multi-Tool Wood & Nails Blade (43 x 30mm), perfect for tackling tough materials; 1 x DT20702 Titanium Bi-Metal Multi-Tool Blade (55 x 44mm) for enhanced durability and strength; and 1 x DEWALT DT20705 Multi-Tool Fast Cut Wood Blade (43 x 65mm) for efficient wood cutting. Whether you’re a professional contractor or a DIY enthusiast, this oscillating blade set will help you achieve precision cuts with ease.
(693354)
Versatile selection of drilling and screwdriving accessories
Black & Gold Metal Drill Bits
TSTAK Compatible Case
Perfect for site or home
The Dewalt DT70784-QZ 100 Piece Accessory Set from ITS is a versatile and impressive selection of drill bits, screwdriver bits, flat bits and sockets that offers a huge amount of versatility on the job.
Whether working on site or working at home, the Black and Gold bits, along with a huge range of other useful accessories, are neatly store in a durable organiser Toughcase.
25mm screwdriver bits: PH1, PH2 (x30), PH3, PZ1, PZ2 (x30), PZ3, T10, T15 (x2), T20 (x2), T25 (x2), T30 (x2), T40
1x 50mm screwdriver bits: PH2, PZ2
1x HSS-G Black and Gold metal drill bits: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm
1x Brad Point drill bits: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm
1x 152mm Flatwood Drill Bits: 22mm, 25mm
1x Socket adapters: 1/4in hex – 1/4in square, 1/4inhex – 3/8in square
1x Socket wrench: 6mm, 8mm, 10mm, 13mm
1x Countersink drill
1x Handle clamp
1x Bit holder with guide
Box contents: 1 x wood drill bit, diameter: 14 mm, 18 mm, 22 mm, 25 mm, 32 mm, in environmentally friendly cardboard packaging Equipped with a ground centre point and innovative bevelled outer cut-out cutting edges, which allow precise positioning of the drill and a clean hole pattern with maximum durability (even for wood with nails) For use in drills (battery and cable), especially suitable for quick and accurate drill hole results in hard and soft wood, construction wood, wood with nails.
Made from a dual steel design allowing for high impact and shock resistant
Highly durable and wear resistant tip helps to reduces down time
High durability and shock resistant shaft prevents breakage
(485333)
Three cutting edges allow for up to 6x faster cutting
Includes 16mm, 20mm, 25mm x 150mm Auger Bits
Three cutting spurs for cleaner, faster holes and extended drilling life
Full screw tip allows bit to self-feed
Tri-flute tapered design for faster removal of wood chips and less binding
The Dewalt DT90237-QZ 3 Piece Extreme Tri Flute 152mm Wood Drill Bit Set from ITS is a selection of drill bits specifically for drilling larger holes in wood.
Each drill bit, 16mm, 20mm, 25mm x 150mm, has three cutting edges that allow for up to six times faster cutting action compared to standard flat bits.. This, along with the tri-flute design, delivers impressive and optimal cutting action along with impressive chip removal.
The three cutting spurs deliver a cleaner, faster hole cutting action along with an extended drilling life. The tapered design allows for a faster removal of chips and debris – this results in less binding delivering premium results.
The quick-change shank fits standard Quick-Change extensions and 1/4″ / 6mm hex bit adapters and excels at preventing spinning.
1x 25mm x 150mm Wood Tri-Flute Auger Bit
1x 20mm x 150mm Wood Tri-Flute Auger Bit
1x 16mm x 150mm Wood Tri-Flute Auger Bit
(806538)
Universal T-shank design
HCS & HSS blades
Deep gullets remove more material
Offer high durability and best cutting results
Provides additional flex to prevent breakage
2x DT2050-QZ 48mm T Shank HCS Jigsaw Blade Wood T 119 BO
2x DT2160-QZ 50mm T Shank HSS Jigsaw Blade Metal T 118 A
2x DT2163-QZ 72mm T Shank HSS Jigsaw Blade Metal T127D
2x DT2165-QZ 73mm T Shank HCS Jigsaw Blade Wood T 101 B
2x DT2177-QZ T Shank HCS Jigsaw Blade Wood T 111 C
(867788)
This Torsion bits maximise the bits life and turning force when used in extreme applications. Impact Torsion give you more surface area and increased friction who gives less slippage and less than 4o of movement.
These Impact ready accessories can be used with all impact drivers
Short and long magnetic screw guides allows for the easy insertion of both long & short screws.
This set includes:
Pack of 25 x 25mm PZ2
(722135)
Professional quality 25mm screwdriver bit set
S2 Grade steel construction for improved quality and durability
Colour coded for easier identification of bit
Includes quick-change adaptor and belt clip
Bits are stored in a pocket case for convenient storage
2x PZ1 25mm Screwdriver Bits
7x PZ2 25mm Screwdriver Bits
2x PZ3 25mm Screwdriver Bits
6x PH1 25mm Screwdriver Bits
2x PH2 25mm Screwdriver Bits
2x SL3 25mm Screwdriver Bits
2x SL4 25mm Screwdriver Bits
2x SL5 25mm Screwdriver Bits
2x SL6.5 25mm Screwdriver Bits
1x T15 25mm Screwdriver Bit
1x T20 25mm Screwdriver Bit
1x T27 25mm Screwdriver Bit
1x T30 25mm Screwdriver Bit
1x T40 25mm Screwdriver Bit
1x Hex to 1/4in Adapter
1x Magnetic Tip Bit Holder
1x Solid Belt Case
How Auto Draws Work:
Auto Draw Prizes Are Drawn Using Our Random Winner Selection Algorithm Which Works The Exact Same Way As The Google Number Generator. The System Will Enter All Of The Sold Ticket Numbers (With Correct Answers), Then Processes & Selects A Winning Ticket Number. The Winner Of An Auto Draw Will Receive An Automatic Winners Email To Inform Them Of Their Win & Also The Following Steps Of How To Receive Their Prize.
This competition is open to UK residents aged 18 or over. You may enter this competition up to 40 times. You will be randomly allocated ticket number(s) when ordering and will receive an email confirmation. The total amount of tickets for this competition is (400). If all tickets do not sell out, the draw will happen on February 14, 2026 regardless. You must answer the competition question correctly to be entered into the live draw. Incorrect entries will not be notified or entered into the live draw. You may enter the competition online, or for free by post by sending your entry to Trade Tool Giveaways on a postcard. You must have an account on Trade Tool Giveaways for your entry to be processed. All details on your entry MUST correspond to the details on your account to receive the order confirmation and ticket number. Postal entries received without a registered account cannot be processed. The live draw will take place on Trade Tool Giveaways Facebook page using Google’s random number generator to select the winning ticket number from all Entrants. This competition is in no way sponsored, endorsed, administered by or associated with Facebook, Apple or Google. By entering the competitions, Entrants agree that neither Facebook, Apple nor Google have any liability and are not responsible for the administration or promotion of this competition.
You can enter this competition up to 40 times.
Once your order has been placed your ticket number(s) will be randomly allocated and will show on your order confirmation. They will also be emailed to you, and will be available in the my account area.
The draw is done live on Facebook using a random number generator to determine the winning ticket number. You’ll be contacted directly if you have won.
If all the entries are sold sooner the draw will be brought forward. Keep updated on the confirmed draw date via our Facebook page and website.
Download our mobile app to keep updated on all of our latest competitions, discounts and special offers whilst on the go!
