🎟️ If Tickets Sellout Early..... 🎟️ Then The Prize Draw Will Be Moved Forward To The Next Earliest Possible Draw Date: Mon 8pm 🎟️ | Wed 8pm 🎟️ | Fri 8pm 🎟️ - Don't wait until the last day because you may just miss out!!!! 🎟️

🎟️ If Tickets Sellout Early..... 🎟️ Then The Prize Draw Will Be Moved Forward To The Next Earliest Possible Draw Date: Mon 8pm 🎟️ | Wed 8pm 🎟️ | Fri 8pm 🎟️ - Don't wait until the last day because you may just miss out!!!! 🎟️

🎟️ If Tickets Sellout Early..... 🎟️ Then The Prize Draw Will Be Moved Forward To The Next Earliest Possible Draw Date: Mon 8pm 🎟️ | Wed 8pm 🎟️ | Fri 8pm 🎟️ - Don't wait until the last day because you may just miss out!!!! 🎟️

ITS logo Official tool supplier for Trade Tool Giveaways
Trustpilot

APP ONLY – FREE – Wera VDE Extra Slim Screwdrivers – Spend £2 For The Bonus

APP ONLY - FREE - Wera VDE Extra Slim Screwdrivers - Spend £2 For The Bonus
APP ONLY - FREE - Wera VDE Extra Slim Screwdrivers - Spend £2 For The Bonus - Image 2
APP ONLY - FREE - Wera VDE Extra Slim Screwdrivers - Spend £2 For The Bonus - Image 3
APP ONLY - FREE - Wera VDE Extra Slim Screwdrivers - Spend £2 For The Bonus - Image 4

£0.00Per Entry

This competition has now closed. Good luck!
Categories: , , , , Tag:

Here’s Your Chance To Win A Set Of Wera VDE 7pc Extra Slim Screwdrivers For Absolutely Nothing!!!

That’s £0.00 To Enter!!!

But.. If You Spend Just £2 In The Same Order As This Free Competition, We Will Also Throw In A Veto Bag Of Your Choice When You Win!!

IN ORDER TO QUALIFY FOR THE BONUS PRIZE, YOU MUST SPEND WHAT IS ASKED PER FREE COMP! 

E.G. IF YOU ENTER 2 X £2 FREE COMPS ON 1 ORDER THEN YOU MUST SPEND £4 TO QUALIFY.

IF YOU ONLY SPEND £2 ON THIS ORDER THAT CONTAINS 2 FREE COMPS THEN YOU WILL NOT QUALIFY FOR EITHER

Wera WERKRAFTVDE

Wera 7 Piece Kraftform ‘160 ISS/7’ Extra Slim VDE Screwdriver Set

WER135961

(995770)

Key Features

Reduced blade diameter

Multi-component Kraftform handles

Individually tested for safe working at 1000 volts

Take It Easy colour-coded tool finder

Slim handle design

Kraftform Plus 160 iSS/7 VDE 7 Piece Screwdriver Set is tested individually to 10,000 volts, in accordance with IEC 60900. This ten times higher testing load guarantees safe working at their maximum permitted load of 1,000 volts.

The screwdrivers have a reduced blade diameter with integrated protective insulation for working in confined situations, allowing low-lying sunken screws and spring elements to be accessed and actuated. ‘Take It Easy’ tool finder, colour-coded according to profile and size for easy identification.

Multi-component Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. All Kraftform screwdriver handles have a non-roll feature at the lower end, the hexagonal design prevents any annoying rolling away. Impact strength tested at -40°C guaranteeing safety even under extreme conditions.

What’s in the box

1x 0.8 x 4 x 100mm VDE 160 iSS Slotted Screwdriver with Reduced Blade and Handle Diameter

1x 1 x 5.5 x 125mm VDE 160 iS Slotted Screwdriver with Reduced Blade Diameter

1x 0.6 x 3.5 x 100mm VDE 160 iS Slotted Screwdriver with Reduced Blade Diameter

1x PH1 x 80mm VDE 162 iSS Phillips Screwdriver with Reduced Blade Diameter

1x PH2 x 100mm VDE 162 iSS Phillips Screwdriver with Reduced Blade Diameter

1x #1 x 80mm VDE 165 iSS PZ/S Pozidriv/Slotted Screwdriver with Reduced Blade Diameter

1x #2 x 100mm VDE 165 iSS PZ/S Pozidriv/Slotted Screwdriver with Reduced Blade Diameter

If You Spend Just £2 In The Same Order As This Free Competition, We Will Also Throw In A Veto Bag Of Your Choice When You Win!!

Bonus Winners Chooses One Of The following Veto Bags….

Veto Pro Pac

Veto Pro Pac Tech OT-MC Open Tool Bag

VETAX3514

(157205)

Key Features

28 Interior & Exterior Pockets

Outside Mounted Stainless Steel Tape Clip

3mm polypropylene base is fully waterproof

Lightweight at only 2.7kg

Heavy duty, durable plastic handles

The Veto Pro Pac Tech OT-MC Open Tool Bag is an open top tool organiser with 28 pockets for easy access

The exterior of the bag features 11 external pockets for easy access to tools whilst working as well as a stainless steel tape clip and 2 large and three small D rings.  Also included is an extra wide, padded,  removeable shoulder strap.

Featuring 17 internal pockets, the tool bag also includes a repositional injection moulded removable box with lid allowing you to customise your storage options.

The OT-MC holds plenty of essential tools for different types of work and is convenient enough to carry everywhere and get into tight spaces

The bag has a 3mm injected moulded polypropylene base to protect against water seeping in if you need to put it on the ground, while the rest of the outer material is made from waterproofed 1200 PVC impregnated denier nylon.

Veto Pro Pac

Veto Pro Pac TECH MCT Compact / Tall Tool Bag

VETAX3513

(658448)

Key Features

44 interior and exterior tool pockets

14kg Payload Capacity

3mm polypropylene base is fully waterproof

1800 PVC impregnated denier fabric for maximum service life

Heavy duty, durable plastic handles

The Veto Pro Pac TECH-MCT Compact/Tall Tool Bag is the ideal tool bag designed for service engineers.

The front side of the bag is fully featured with 2 external zipped pockets and a snap back for easy access to tools whilst working. The reverse side has a zipped pocket and a quick access Velcro pocket for bit extensions and smaller items.

The ends of Tech MCT are fully utilised with 2 pockets each end for torches, pens and knives etc. In addition one end has a metal clip to hold a tape measure and the other an electrical tape strap.

The inside front has a fully featured storage compartment holding 3 rows of tools up to 31.75cm (12.5″). The reverse side has compartments for meter storage, and a small cordless drill plus further pockets for hand tools. It is smaller than the Tech LC with a foot print of 20.3cm x 25.4cm (8″ x 10″)

The Tech MC has 44 pockets inside and out, two storage bays with ample room for hand tools, meters, and a compact cordless drill, as well as smaller tools and accessories. It also includes D-rings, memory stick pockets, and a stainless steel tape clip as well as a quick access outside pocket for drill bit extensions and small items. The handle has an over-moulded ergonomic grip and a 3″ wide padded shoulder strap.

 

How Auto Draws Work:

Auto Draw Prizes Are Drawn Using Our Random Winner Selection Algorithm Which Works The Exact Same Way As The Google Number Generator. The System Will Enter All Of The Sold Ticket Numbers (With Correct Answers), Then Processes & Selects A Winning Ticket Number. The Winner Of An Auto Draw Will Receive An Automatic Winners Email To Inform Them Of Their Win & Also The Following Steps Of How To Receive Their Prize.

This competition is open to UK residents aged 18 or over. You may enter this competition up to 10 times. You will be randomly allocated ticket number(s) when ordering and will receive an email confirmation. The total amount of tickets for this competition is (5000). If all tickets do not sell out, the draw will happen on March 21, 2025 regardless. You must answer the competition question correctly to be entered into the live draw. Incorrect entries will not be notified or entered into the live draw. You may enter the competition online, or for free by post by sending your entry to Trade Tool Giveaways on a postcard. You must have an account on Trade Tool Giveaways for your entry to be processed. All details on your entry MUST correspond to the details on your account to receive the order confirmation and ticket number. Postal entries received without a registered account cannot be processed. The live draw will take place on Trade Tool Giveaways Facebook page using Google’s random number generator to select the winning ticket number from all Entrants. This competition is in no way sponsored, endorsed, administered by or associated with Facebook, Apple or Google. By entering the competitions, Entrants agree that neither Facebook, Apple nor Google have any liability and are not responsible for the administration or promotion of this competition.

How many times can I enter this competition?

You can enter this competition up to 10 times.

How do I get my number?

Once your order has been placed your ticket number(s) will be randomly allocated and will show on your order confirmation. They will also be emailed to you, and will be available in the my account area.

How is the winner chosen?

The draw is done live on Facebook using a random number generator to determine the winning ticket number. You’ll be contacted directly if you have won.

Can the draw date change?

If all the entries are sold sooner the draw will be brought forward. Keep updated on the confirmed draw date via our Facebook page and website.

You may also like...

View All Competitions

Download our app today

Download our mobile app to keep updated on all of our latest competitions, discounts and special offers whilst on the go!

Apple App Store Google Play Store
Copyright © 2025 Trade Tool Giveaways Ltd. Registration Number: 12591433
Competition Websites by Think Zap