SATURDAY’S PRIZES 👀 Auto Draw Comps Close At 10pm ❌ Enter Now & Be Our Next Winner 🏆
SATURDAY’S PRIZES 👀 Auto Draw Comps Close At 10pm ❌ Enter Now & Be Our Next Winner 🏆
SATURDAY’S PRIZES 👀 Auto Draw Comps Close At 10pm ❌ Enter Now & Be Our Next Winner 🏆
SATURDAY’S PRIZES 👀 Auto Draw Comps Close At 10pm ❌ Enter Now & Be Our Next Winner 🏆
£0.05Per Entry
(791375)
Adjustable pliers offers 38mm Jaw Opening
Waterpump pliers are 250 mm overall length with a jaw opening capacity of 45 mm
Ergonomic dual-material handle — oil-resistant and fatigue-reducing.
Laser-etched scale & secure left-turning screw — for accurate, stable adjustments.
Durable alloy steel construction with phosphate finish for corrosion resistance
1x Bahco 9031 Adjustable Pliers
1x Bahco 8224 Waterpump Pliers
(971950)
Ergonomically designed under the ERGO process for comfort, reduced fatigue and better control in use
Jaw lock system that prevents the jaw from falling out even at maximum opening
Laser-etched mm scale on the wrench body for pre-adjusting and improved accuracy
Oil- and Skydrol-resistant rubber handle with a high-friction surface that tolerates grease and prevents slipping
1x Bahco ERGO 20mm Adjustable Wrench
1x Bahco ERGO 27mm Adjustable Wrench
1x Bahco ERGO 31mm Adjustable Wrench
(835805)
Versatile, portable and incredibly handy
High performance alloy steel with Matte finish
Quick socket release button on ratchet
Less wear and damage to fastener thanks to Dynamic-Drive profile sockets
High density polythene case
12x 1/4in Sq. Sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm and 13mm
1x 1/4in Sq. Drive compact 125mm long ratchet handle with quick release button
1x 1/4in Sq. Drive 100mm extension bar
1x 1/4in bit holder
2x PH2 Bits
1x 5.0mm HEX Bit
1x 6.0mm HEX Bit
1x T10 TORX Bit
1x T15 TORX Bit
1x T20 TORX Bit
1x T25 TORX Bit
1x T30 TORX Bit
1x T40 TORX Bit
1x Sliding T bar
(821545)
Handsaw for medium to thick wood
Hardpoint universal toothing
Induction hardened points
Comfortable screwed single-component handle
45° & 90° marking guides
3x 244 Universal Handsaw 550mm/22in
(174382)
Precision-ground blades ready to use, delivering sharpness and clean cuts
Hardened and tempered steel construction for long life and edge retention
Two-component rubberised handle for improved grip, comfort and control
Supplied in a varnished wooden presentation box with tip protectors to safeguard blades between uses
1x Bahco 6.0mm Woodworking Chisel
1x Bahco 10mm Woodworking Chisel
1x Bahco 12mm Woodworking Chisel
1x Bahco 16mm Woodworking Chisel
1x Bahco 18mm Woodworking Chisel
1x Bahco 25mm Woodworking Chisel
1x Bahco 32mm Woodworking Chisel
1x Bahco 38mm Woodworking Chisel
1x Premium Wooden Case
(103719)
Easy to insert in the screw head from a range of angles
For more efficient work and time saver
Long arm provides higher torque transmission and accessibility
High quality steel, entirely hardened
Size stamped in the blade for easy identification
1x 1.5mm Ball End Hex Key
1x 2.0mm Ball End Hex Key
1x 2.5mm Ball End Hex Key
1x 3.0mm Ball End Hex Key
1x 4.0mm Ball End Hex Key
1x 5.0mm Ball End Hex Key
1x 6.0mm Ball End Hex Key
1x 8.0mm Ball End Hex Key
1x 10mm Ball End Hex Key
1x Plastic Holder
(684329)
For work on live equipment, up to 1000 V, high quality blade insulation moulded directly onto the blade
Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10000 V
Black oxide tip for higher accuracy
Handle made with over 75% rubber
Integrated hanging hole
1x 0.5mm x 3.0mm x 100mm Insulated Slotted Screwdriver
1x 0.8mm x 4.0mm x 100mm Insulated Slotted Screwdriver
1x 1.0mm x 5.5mm x 120mm Insulated Slotted Screwdriver
1x 1.2mm x 6.5mm x 150mm Insulated Slotted Screwdriver
1x PH0 x 75mm Insulated Phillips Screwdriver
1x PH1 x 80mm Insulated Phillips Screwdriver
1x PH2 x 100mm Insulated Phillips Screwdriver
This competition is open to UK residents aged 18 or over. You may enter this competition up to 1000 times. You will be randomly allocated ticket number(s) when ordering and will receive an email confirmation. The total amount of tickets for this competition is (10499). If all tickets do not sell out, the draw will happen on December 1, 2025 regardless. You must answer the competition question correctly to be entered into the live draw. Incorrect entries will not be notified or entered into the live draw. You may enter the competition online, or for free by post by sending your entry to Trade Tool Giveaways on a postcard. You must have an account on Trade Tool Giveaways for your entry to be processed. All details on your entry MUST correspond to the details on your account to receive the order confirmation and ticket number. Postal entries received without a registered account cannot be processed. The live draw will take place on Trade Tool Giveaways Facebook page using Google’s random number generator to select the winning ticket number from all Entrants. This competition is in no way sponsored, endorsed, administered by or associated with Facebook, Apple or Google. By entering the competitions, Entrants agree that neither Facebook, Apple nor Google have any liability and are not responsible for the administration or promotion of this competition.
You can enter this competition up to 1000 times.
Once your order has been placed your ticket number(s) will be randomly allocated and will show on your order confirmation. They will also be emailed to you, and will be available in the my account area.
The draw is done live on Facebook using a random number generator to determine the winning ticket number. You’ll be contacted directly if you have won.
If all the entries are sold sooner the draw will be brought forward. Keep updated on the confirmed draw date via our Facebook page and website.
Download our mobile app to keep updated on all of our latest competitions, discounts and special offers whilst on the go!
