Win a Unilite Bundle


Max 50 Entries Per Person

Live Draw 27/06/2022 @ 6PM

All competitions are drawn sooner if sold out
Live draw takes place regardless of sell out !!!
For Information about Postal Entries Click Here
Interactive Live Draw via our FACEBOOK Page

Unilite PS-HDL2 LED Light Weight Head Torch


The Unilite PS-HDL2 can provide a maximum of 200 lumens of white light from the central Cree LED when in the highest setting.

Four settings of high, mid, low and SOS are available from the central spot Cree LED and the two side LEDs provide high and low flood lighting options as well as a strobe function.

Quick single presses cycle through the settings of high spot, mid spot, low spot, SOS and off. To switch between the spot LED and the flood LEDs press and hold the button down while the head torch is on. The PS-HDL2 will remember the last used mode (spot or flood) and will turn back on in that mode until you hold the button down again to change modes. Once the side LEDs are selected, they will then cycle through high flood, low flood and strobe.

As well as the adjustable headband, the PS-HDL2 also includes a bracket with a 3M adhesive pad on the back so that you can attach the head torch unit to an industrial helmet or a sports helmet.

The head can be tilted forwards up to 45° so you can direct the light where needed and it can shine up to 90 metres distance. The bracket housing is hollowed to reduce the weight, making this a super lightweight head torch that only weighs 88 grams including the batteries.

Powered by three AAA alkaline or NiMH batteries (not compatible with lithium batteries), the PS-HDL2 has a run-time of up to 5 hours in the high setting.


The CRI-600R is a high CRI 96+ rechargeable inspection light. It has a small profile and weighs just 190g, yet is built with high quality materials. Constructed of toughened aluminium & polycarbonate, it retains an IP65 dust & water resistance. It has a maximum 600 lumen output and this is with 5 independent colour temperatures. These are 2700k/3500k/4500k/5500k/6500k. Its top torch is now a 1W UV LED (395nm) and powering it is a strong 2500mAh rechargeable battery. For handsfree use there are magnets on the base and rear.

Unilite IL-275R 360° Rechargeable LED Inspection light – 275 lumens

The Unilite IL-275R is a compact USB rechargeable light with a maximum output of 275 lumens from the white COB LED flood light and a 360° swivel capability.

As well as the COB LED floodlight the IL-275R also has an additional torch function in the top with a maximum output of 150 lumens white light from a SMD LED. The super strong magnet is built into the base of the 360° swivel ball joint and allows the torch to be attached to magnetic surfaces and then angled in any direction allowing for hands free use and optimum light positioning.

A single button on the back operates all light functions and once the light is on each press will cycle high, low, torch and off.

Utilising a 3.7 V 700 mAh LI-PO rechargeable battery, the IL-275R has a run time of up to 1 hour, 30 minutes on the highest setting. The battery is easily recharged by inserting the charging cable into the micro USB port on the side of the light at one end and inserting the other end into a USB port or suitable USB adaptor. Charging takes approximately 1 hour, 30 minutes.

It is made from super tough construction with a IK07 impact resistance, featuring  a durable, florescent yellow rubber hand and rear pocket clip attachment. It is rated to IP20 standard, so has some resistance to solids, however it has no protection against liquids, so cannot be used in wet conditions.

Unilite HX-800R Rechargeable Dual LED Work Light – 800 lumens

The Unilite HX-800R is a compact rechargeable work light that uses fast USB-C charging, and has a maximum output of 800 lumens from the 7 W white COB LED flood light.

As well as the floodlight the HX800R also has an additional 3 W SMD LED that sits in the centre of the COB LED, and provides a spot spot beam with an output of 300 lumens.

A single button on the back operates all light functions with one press to turn the light on, and each press within 5 seconds will then cycle from spot to flood low, flood mid and flood high. If in any setting longer than 5 seconds the next press will turn the light off rather than cycling through to the next output, and the last used setting will be remembered next time the light is turned on.

Utilising a 3.7 V 2600 mAh lithium-ion rechargeable battery, the HX800R has a run time of up to 2 hours, 30 minutes on the highest setting. With the torch off, the battery is easily recharged by lifting the dust cover and inserting the charging cable into the USB Type C port on the back of the light at one end, and inserting the other end into a USB port or suitable USB adaptor.

While charging the three charging indicators on the back will display charging progress with one light flashing to start with before becoming solid and the next light flashing until eventually all three LEDs are solid after approximately 4 hours full charge time. The three LED indicators also light up when the torch is turned on to show remaining battery power at the current output.

The HX800R has multiple hands free uses with the 180° rotating stand that can be put at different angles for a range of light positions, used to attach to magnetic surfaces with the strong magnets, or used as a hanging hook.

It is made from super robust nylon polymer and rubber with a florescent yellow outer for increased durability and visibility

Unilite Kit Bag

  • Length 50cm
  • Width 28cm
  • Height 28cm