🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM 🚀
🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM 🚀
🎟️ ENTRIES CLOSE 7.30PM - LIVE DRAWS THIS WEEK: MON 8PM | WED 8PM | FRI 8PM 🎥 FREE GIVEAWAYS EVERY SINGLE DAY LAUNCHED 8PM 🚀
£0.00Per Entry
IN ORDER TO QUALIFY FOR THE BONUS PRIZE, YOU MUST SPEND £1 PER FREE COMP!
E.G. IF YOU ENTER 2 FREE COMPS ON 1 ORDER THEN YOU MUST SPEND £2 TO QUALIFY.
IF YOU ONLY SPEND £1 ON AN ORDER THAT HAS 2 FREE COMPS THEN YOU WILL NOT QUALIFY FOR EITHER
(964751)
L-keys for hexagonal socket screws
Rack that can be set upright on the table or hung on the wall
Hexagonal ballpoint on the long arm
BlackLaser for high corrosion protection and long service life
Removable magnet for magnetising and demagnetising tool tips
The Wera 950/9 9 Piece Hex-Plus Multicolour 3 Metric L-Key Set is a portable selection of long allen keys with a plastic sleeve and ball end head.
L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures.
Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out).
Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: HexPlus tools fit into every standard hexagon socket screw!
The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, “around-the-corner” screwdriving jobs.
Take it easy tool finder system – with profile and size colour-coding for quick and easy tool selection.
The rack for the L-keys can be set up on the table or hung on the wall. The clip is removable; so the L-keys can also be taken out and about. The rack includes a removable magnetiser that can be used to magnetise (and demagnetise) screws and tool tips.
1x 1.5 x 90 mm 950 SPKL L-key
1x 2 x 101 mm 950 SPKL L-key
1x 3 x 123 mm 950 SPKL L-key
1x 4 x 137 mm 950 SPKL L-key
1x 5 x 154 mm 950 SPKL L-key
1x 6 x 172 mm 950 SPKL L-key
1x 8 x 195 mm 950 SPKL L-key
1x 10 x 224 mm 950 SPKL L-key
1x 2.5 x 112 mm 950 SPKL L-key
1x 9539 L-key clip
1x 9109 Wall holder/Base for L-key clip
1x 9538 Magnetiser
(880127)
Perfect tool for the end of a job
Last tool used on a job, first tool used on a weekend
T-Handle perfect for enhanced grip
Do not use with screw top bottlesY’know when you’ve had a tough week, and you want something a bit better than a beer, then grab a good bottle of red, white, or rose, and begin the evening, weekend or holiday and with the help of this unique Wera ‘Corkscrew’, crack open and enjoy a glass.
Designed in the same way as Wera screwdrivers, wrench or Hex sets, this strong corkscrew is perfect for those who love the Wera Brand. The handle is even in the design of thier T-Handle screwdrivers making it easier to remove the cork from the bottle of your choice
1x Wera Corkscrew
(399458)
Five different ratchet types in one
Flywheel design & easy-to-grip free-turning sleeve
Can also be used as a screwdriver
Fine-toothing for small 5° return angle
Pouch for belt attachment
Kraftform Kompakt Zyklop Speed 26 Piece Set with Belt Pouch combines five different ratchet types in one: Fine-tooth ratchet, Flex-head ratchet, Angle ratchet, Quick-release ratchet, Power ratchet plus it can also be used as a screwdriver.
Flywheel design and easy-to-grip, free-turning sleeve for fast working speeds. Freely pivoting ratchet head; predefined locking at 0°, 15° & 90° both to the left and right as well as 15° from 90° inwards; can be used as a conventional screwdriver in its 0° position. Simple push button release and a thumbwheel for quick and easy left/right switchover at any position. No complicated handling, no loss of time.
The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°, this short stroke allows fast and precise work in all types of installation.
Multi-component Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. All Kraftform screwdriver handles have a non-roll feature at the lower end, the hexagonal design prevents any annoying rolling away. Impact strength tested at -40°C guaranteeing safety even under extreme conditions.
1x 1/4in x 152mm 8000 A Zyklop Speed Ratchet
1x 1/4in x 37mm 8784 A1 Zyklop Bit Adaptor
1x 1/4in x 150mm 8794 LA Zyklop Extension with Free-Turning Sleeve
1x PH1 x 50mm 851/4 TZ Screwdriver Bit
1x PH2 x 50mm 851/4 TZ Screwdriver Bit
1x PH3 x 50mm 851/4 TZ Screwdriver Bit
1x PZ 1 x 50 mm 855/4 TZ Screwdriver Bit
1x PZ 2 x 50 mm 855/4 TZ Screwdriver Bit
1x TX10 x 50mm 867/4 Z Torx Screwdriver Bit
1x TX15 x 50mm 867/4 Z Torx Screwdriver Bit
1x TX20 x 50mm 867/4 Z Torx Screwdriver Bit
1x TX25 x 50mm 867/4 Z Torx Screwdriver Bit
1x TX27 x 50mm 867/4 Z Torx Screwdriver Bit
1x TX30 x 50mm 867/4 Z Torx Screwdriver Bit
1x 1 x 5.5 x 50mm 800/4 Z Screwdriver Bit
1x 3 x 50mm 840/4 Z Screwdriver Bit
1x 4 x 50mm 840/4 Z Screwdriver Bit
1x 5 x 50mm 840/4 Z Screwdriver Bit
1x 6 x 50mm 840/4 Z Screwdriver Bit
1x 5.5 x 23mm 8790 HMA Zyklop 1/4in Socket
1x 6 x 23mm 8790 HMA Zyklop 1/4in Socket
1x 7 x 23mm 8790 HMA Zyklop 1/4in Socket
1x 8 x 23mm 8790 HMA Zyklop 1/4in Socket
1x 10 x 23mm 8790 HMA Zyklop 1/4in Socket
1x 12 x 23mm 8790 HMA Zyklop 1/4in Socket
1x 13 x 23mm 8790 HMA Zyklop 1/4in Socket
(379414)
For every application the right tool
With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall.
Multi-component Kraftform handle for high working speeds and ergonomic screwdriving
Lasertip tips for more secure fit in the screw head
Chiseldriver for fastening, chiselling and loosening
The Wera 9650 9 Piece Kraftform Screwdriver Set with Magnetic Rail is possibly one of the most versatile Wera screwdriver sets available.
Series 900 – the Chiseldriver
The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering.
With a pound-thru hexagon blade made from highgrade material for – zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster.
Kraftform Plus – Series 100 VDE
These screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested.
Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.
Kraftform Screwdrivers Series 300
Kraftform Plus screwdrivers – ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned.
Lasertip prevents slipping out
It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury.
The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally “bites” itself firmly into the screw head. Slipping out becomes a thing of the past.
1x 1 x 5.5 x 100 mm 932 A Screwdriver for slotted
1x 1.2 x 7 x 125 mm 932 A Screwdriver for slotted
1x PH 2 x 100 mm 350 PH Screwdriver for Phillips
1x PZ 1 x 80 mm 355 PZ Screwdriver for Pozidriv
1x PZ 2 x 100 mm 355 PZ Screwdriver for Pozidriv
1x TX 20 x 100 mm 367 Screwdriver for TORX
1x TX 25 x 100 mm 367 Screwdriver for TORX
1z 1x 0.8 x 4 x 100 mm 335 Screwdriver for slotted
1x 0.6 x 3.5 x 100 mm 160 iS VDE Insulated screwdriver for slotted screws
1x Magnetic Rail for 9 Screwdrivers
E.G. IF YOU ENTER 2 FREE COMPS ON 1 ORDER THEN YOU MUST SPEND £2 TO QUALIFY.
IF YOU ONLY SPEND £1 ON AN ORDER THAT HAS 2 FREE COMPS THEN YOU WILL NOT QUALIFY FOR EITHER!
This competition is open to UK residents aged 18 or over. You may enter this competition up to 5 times. You will be randomly allocated ticket number(s) when ordering and will receive an email confirmation. The total amount of tickets for this competition is (5000). If all tickets do not sell out, the draw will happen on September 9, 2024 regardless. You must answer the competition question correctly to be entered into the live draw. Incorrect entries will not be notified or entered into the live draw. You may enter the competition online, or for free by post by sending your entry to Trade Tool Giveaways on a postcard. You must have an account on Trade Tool Giveaways for your entry to be processed. All details on your entry MUST correspond to the details on your account to receive the order confirmation and ticket number. Postal entries received without a registered account cannot be processed. The live draw will take place on Trade Tool Giveaways Facebook page using Google’s random number generator to select the winning ticket number from all Entrants. This competition is in no way sponsored, endorsed, administered by or associated with Facebook, Apple or Google. By entering the competitions, Entrants agree that neither Facebook, Apple nor Google have any liability and are not responsible for the administration or promotion of this competition.
You can enter this competition up to 5 times.
Once your order has been placed your ticket number(s) will be randomly allocated and will show on your order confirmation. They will also be emailed to you, and will be available in the my account area.
The draw is done live on Facebook using a random number generator to determine the winning ticket number. You’ll be contacted directly if you have won.
If all the entries are sold sooner the draw will be brought forward. Keep updated on the confirmed draw date via our Facebook page and website.
Download our mobile app to keep updated on all of our latest competitions, discounts and special offers whilst on the go!
